VLMU3100 www.vishay.com vishay semiconductors rev. 1.0, 24-jul-12 1 document number: 82556 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 uv smd led plcc-2 description the package of the VLMU3100-series is the plcc-2. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear silicone which guaranties long life time. the viewing angle is 120, package dimensions are 3.2 mm x 2.8 mm x 1.9 mm. product group and package data ? product group: led ? package: smd plcc-2 ? product series: standard ? angle of half intensity: 60 ?lead-finishing: ag features ? uv smd led with exceptional brightness ? high efficient ingan technology ? long life time due to silicone casting ? compatible with automatic placement equipment ? eia and ice standard package ? compatible with ir reflow and vapor phase ? available in 8 mm tape ? low profile package ? non-diffused lens: excellent for coupling to light pipes and backlighting ? low power consumption ? preconditioning: accordi ng to jedec level 3 ? esd-withstand voltage: up to 1 kv according to jesd22-a114-b ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? curing of glue and laquer ? recognition of safety features of money bills safety advices depending on the mode of op eration, these devices emit highly concentrated non visible ultraviolet light which can be hazardous to the human eye. products which incorporate these devices have to follow th e safety precautions given in iec 60825-1 safety of laser products. 19225 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) forward voltage (v) technology min. typ. max. min. typ. max. min. typ. max. VLMU3100-gs08 ultraviolet 9 11 13 20 400 405 410 2.8 3.2 3.8 ingan absolute maximum ratings (t amb = 25 c, unless otherwise specified) VLMU3100 parameter test condition symbol value unit forward current i f 30 ma power dissipation p tot 120 mw junction temperature t j + 100 c operating temperature range t amb - 40 to + 80 c storage temperature range t stg - 40 to + 100 c solder temperature t sol 260/5 c/s
VLMU3100 www.vishay.com vishay semiconductors rev. 1.0, 24-jul-12 2 document number: 82556 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous in tensity vs. angular displacement fig. 3 - relative in tensity vs. wavelength fig. 4 - specific luminous intensity vs. forward current optical and electrical characteristics (t amb = 25 c, unless otherwise specified) VLMU3100, ultraviolet parameter test condition symbol min. typ. max. unit luminous intensity i f = 20 ma l v 91113mcd dominant wavelength i f = 20 ma d 400 405 410 nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 2.8 3.2 3.8 v reverse current v r = 5 v i r - - 10 a 0 5 10 15 20 25 30 35 0 102030405060708090100 t amb - ambient temperature (c) i f - forward current (ma) 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0 20 40 60 80 100 375 400 425 450 475 - wavelength (nm) i rel - relative intensity (%) 10 30 50 70 90 0 0.2 0.4 0.6 0.8 1.0 020 i f - forward current (ma) relative luminous intensity (t amb = 25 c) 0.1 0.3 0.5 0.7 0.9 18 16 14 12 10 8 6 4 2
VLMU3100 www.vishay.com vishay semiconductors rev. 1.0, 24-jul-12 3 document number: 82556 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters solder pad layout method of taping/polarity and tape and reel smd led (vlm3 - series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (i n accordance with din iec 40 (co 564) for automatic component insertation. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. arrangement of tape feeding direction dimensions of reel in millimeters
VLMU3100 www.vishay.com vishay semiconductors rev. 1.0, 24-jul-12 4 document number: 82556 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 soldering profile fig. 5 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020c) bar code product label (example) a. type of component b. manufacturing plant c. sel - selection code (bin): e.g.: p2 = code for luminous intensity group 3 = code for color group d. date code year/week e. day code (e.g. 2: tuesday) f. batch no. g. total quantity h. company code dry packing the reel is packed in an an ti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to prev ent moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 168 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorption , the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22-a112 level 3 label is included on all dry bags. example of jesd22 -a112 level 3 label esd precaution proper storage and handling pro cedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning la bels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors standard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885-1 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 3 max. 2 cycles allowed 255 c 106 37 vishay a h bc d e f g 20147 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 168 hours at factory condition of < 30c/60%rh or b) stored at 10% rh . 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/-0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a112 3 20003 <
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
